Universal Waveform Source
Aside from its natural ability to generate arbitrary shapes with waveform granularity of 1 point, the WX2181B can also be used as a full-featured standard, modulation or pulse generator to solve various applications. Equipped with 2.3GS/s 14-bit clock and 16M points (32M optional) memory, the WX2181B can generate literally any waveform, short or long, at frequencies up to 1GHz with 8 digits of resolution, resulting in the highest precision signal creation and regeneration without compromising signal fidelity or system integrity.
Signal Integrity and Purity
One of the most important requirement in today’s testing and measurement applications is high signal quality. With a typical SSB phase noise of <-115dBc at 100MHz, and <-95dBc at 1GHz, at 10 kHz carrier offset and with exceptionally good SFDR of <-70dBc at 1GHz carrier, Tabor’s WX1282B unique platform delivers one of the best quality signals available on the market today, answering the ever-growing demand for clear and precise signals.
DC or AC Coupled Outputs
Have a requirement for different output paths in your lab? Great! The WX2181B offers two single or differential ended DC coupled and one single ended AC coupled output amplifiers: 2Vp-p into 50 ohms with 700MHz bandwidth, for applications demanding optimized transitions and aberrations; 4Vp-p into 50 ohms with 350MHz bandwidth, for applications demanding high voltage or -20 to +10 dBm path for applications requiring bandwidth and flatness for frequencies as high as 1GHz.
Powerful Segmentation and Sequencing
Solving almost every complex application, powerful segmentation and sequencing produces a nearly endless variety of complex waveforms. The waveform memory can be divided into multiple waveform segments and sequenced in user-selectable fashion to create complex waveforms that have repeatable segments, jump and nest, saving you precious memory space. The WX2181B also allows you to generate up to 1000 sequence scenarios and sequence between them to generate an even higher level of flexibility in waveform creation.
Dynamic Segment / Sequence Control
Working in the real-time world and need fast waveform switching? The WX2181B has a rear panel control designed specifically for that. Having the dynamic control feature, in effect, can serve as replacement of the sequence table where the real-time application can decide when and for how long a waveform will be generated. For much more complex applications, this same input may serve as a dynamic switch for complete sequences, creating real-life scenarios for real-time applications.
Smart Trigger
Until now, you`ve been forced to trigger on a specific event. Tabor`s all-new SmarTrigger feature was designed to enhance the trigger capability and facilitate wider flexibility of a specific pulse event. It allows triggering on either a pulse having a larger pulse width than a programmed time value (time), or even on a pulse having a pulse width between two limits (<>time). In addition, the SmarTrigger has a hold-off function, in which the output is held idle after the first trigger and starts a waveform cycle only with the first valid trigger after a hold-off interval has lapsed, allowing you to solve endless "negotiation" scenarios.
Pulse / Pattern Creation
Generating complex pulse trains has never been easier. The Pulse Composer is a powerful built-in tool that converts the WX2181B to a very sophisticated Pulse/Pattern Generator, allowing to create literally any complex pulse train / pattern, whether it’s a single pulse, multi-level, linear-points, initialization or preamble pattern definition, arbitrary bit design, user-defined or even standard random patterns with programmable resolution, so it doesn’t matter if your application is radar communications, nanotechnology or serial bus testing, the pulse/pattern composer is the right tool for your application. Moreover, all the WX2181B advanced trigger modes are applicable, hence one can choose to use the “step” mode to advance every bit independently or the “once” mode to advance a complete data block in one trigger event, enabling even more applications, such as trigger, clock and data protocols.
Multi-Level and PAM(n) Signals
The WX2181B’s pulse composer enables up to 2Gbit/s data rate generation, utilizing either NRZ and RZ modes (minimum transition times) which is ideal especially for multi level and PAM(n) applications such as, LED (light-emitting diodes), CAN, QPHY, FlexRay or simulating and testing Ethernet environment, whether it’s 100Mbit/s (100BASE-T), the later gigabit Ethernet (1000BASE-T) or even the latest 802.3an standard (10GBASE-T), which utilizes PAM-16.
Programmable Deferential Markers
The WX2181B is equipped with two programmable deferential markers . Differential simply means outstanding signal integrity for high frequencies, whereas the programmability allows you to set position, width, delay and amplitude for any required peripheral triggering need. While bench usage enables setting only one marker position, you can set multiple markers and program different marker properties for each transition instance remotely, allowing various triggering profiles.
Automated External Calibration
Usually, calibration cycles in the industry range from one to three years, where instruments are sent to a service center, opened to allow access to trimmers, calibrated and certified for repeated usage. In contrast, the innovative advanced technology implemented in the WX2181B allows calibration from ANY interface, USB, GPIB or LAN. Calibration factors are stored in a flash memory eliminating the need to open instrument covers.
Easy to Use
Large and user-friendly 4” backlit color LCD display facilitates browsing though menus, updating parameters and displaying detailed and critical information for your waveform output. Combined with numeric keypad, ten quick-link function & run mode buttons, cursor position control and a dial, the front panel controls simplify the often complex operation of an arbitrary waveform generator.
High Speed Access
Access speed is an increasingly important requirement for test systems. Included with the instrument is a variety of interfaces including: Ethernet 10/100/1000, USB 2.0 and GPIB so one may select the interface most compatible to individual requirements. Using any of the external interfaces, controlling instrument functions and features as well as downloading waveforms and sequences is fast, time saving and easily tailored to every system, from simple benchtop instrumentation to fully-featured ATE system. IVI drivers and factory support speed-up system integration, minimizing time-to-market and significantly reducing system development costs.
Multiple Environments to Write Your Code
Model WX2181B comes with a complete set of drivers, allowing you to write your application in various environments such as: Labview, CVI, C++, VB, and MATLAB. You may also link the supplied dll to other Windows based API’s or, use low-level SCPI commands (Standard Commands for Programmable Instruments) to program the instrument, regardless if your application is written for Windows, Linux or Macintosh operating systems.
Digital Outputs (Option D)
In today’s world, many applications require multiple digital outputs or a parallel digital interpretation of the analog outputs. With the new digital option the WX2181B-D now offers up to 16 programmable digital outputs per channel, up to extra 32M of digital memory, up to 1.15Gb/s of data rate and controllable skew between outputs. Combined with Tabor’s dedicated digital signal amplifier, WXD1, the WX2181B-D is, by far, the best mixed signal source on the market to meet all of today>s requirements.
ArbConnection
The ArbConnection software provides you with full control of instrument functions, modes and features. ArbConnection is a powerful editorial tool that allows you to easily design any type of waveform. Whether it is the built in wave, pulse or Serial data composers, or the built in equation editor with which you can create your own exotic functions, ArbConnection makes virtually any application possible.