Home > Products > Signal Amplifiers > High-Voltage Amplifiers > Dual Channel > Model 9200

 

High voltage output to 300Vp-p (±150V)   Output current to 100 mA per channel   Wideband range to over 500 kHz   Slew rate to 200V/µs   Low distortion   Low cost   Custom Configuration of:          Gain          Signal Ground

Solves Common Problems Model 9200 operates as an amplifying buffer for signals emitted from waveform, function, or pulse generators. Most of these generators produce signals limited to 20Vp-p into high impedance. Model 9200 can convert these voltages to levels as high as 300Vp-p. The amplifier has a current driving capability of ±100mA per channel from a 0.1Ω source. While the output can drive small capacitive or inductive loads, for full high speed potential it is recommended that the load characteristics should be mainly resistive. Model 9200 can withstand load capacitance and inductance up to 0.01µF and 0.5 mH without any performance deterioration

Ground Level The advanced power amplifier is supplied with floating input and output connectors allowing flotation from ground level up to 250Vdc. The only limitation is that both the input and output grounds must connect to the same level. This capability is extremely important in applications where the amplifying device must reside on the same ground level as its source. The floating capability can be added or removed using a simple, user-accessible, jumper connection.

Target Applications The amplifier case was designed to stack on top or below other Tabor products. It also can be mounted alongside a Tabor generator in a standard 19" rack. The waveform-amplifier combo is an ideal solution for virtually any high-voltage, wide bandwidth application.

Cost Effective Solution Priced at around $2700, the Model 9200 power amplifier is yet another of Tabor`s cost-effective solutions for a full range of high voltage applications.

Options
Name  Description  Option 1  Gain (1 through 20, fixed *)  Option 2  Signal Ground (Tied to Ground or   Floated Ground)
Accessories
Name  Description  S-Rack mount  19" Single Rack Mounting Kit  D-Rack mount  19" Dual Rack Mounting Kit  Case Kit  Professional Carrying Bag
* Custom gain from x10 to x20 can be ordered however, bandwidth cannot be maintained. Consult the factory before ordering gain above 15. Note: Options and Accessories must be specified at the time of your purchase.