Home > Products > Discontinued Products > Universal Counters / Timers > Model 6010

 

2 x 125 MHz independent input channels   Optional Frequency Measurement to 1.3 GHz   Standard TCXO stability Oscillator   Optional high-stability Rubidium Oscillator   Bright 9 digits display; visible at any lighting condition   Advanced measurement technique for maximum resolution in frequency measurements   Resolves frequency resolution to 8 digits in one second of gate time (with option 1)   10ps Averaged time interval resolution (with option 1)   Auto-triggering, auto-attenuation for error free operation   Complete input conditioning on both channels, with internal 50Ω, attenuators, low-pass filters, and slope selection   13 automatic measurements, including peak signal amplitude   50 built-in gate time intervals plus an external input, extend gate time range from 100µS to 1000s   GPIB programmability; including trigger level, and faster measurement rate   10 storable front panel set-ups

Extremely User-Friendly Operation Design approach emphasizes simplicity of operation. Numerous functions, parameters and operating modes resolved to simple, logical blocks and one keystroke operation. In fact, operation is so easy that first time users rarely require an Instruction Manual.

A.T.E. Environment Unusually flexible software package. With simple commands one can adapt handshake, commands and termination to designated controller.

High Reliability Each Tabor instrument is aged for at least two weeks and subsequently 100% computerized tested before shipping.

Versatility Model 6010 is virtually a self-contained automatic test system. A non-volatile memory is capable of storing up to 10 various front panel set-ups; each dedicated to a different test procedure. Recalling a specific set-up or accessing a few set-ups is performed with pushbutton ease.

High Performance Trigger In manual mode, the trigger level is programmable from -5.1V to + 5.1V (-51V to + 51V in X10 mode) with an exceptional resolution of 10 mV (100mV in X10 mode). An automatic trigger mode is also available covering the frequencies from 100Hz to 150MHz.

Automatic Attenuation Selection Auto trigger mode automatically switches attenuator settings if the input signal exceeds 5.1Vpk-pk.

DVM Measurements Automatic triggering is used to establish the peak voltages for setting trigger points. This feature is used to measure peak voltage levels.

Individual Channel Filtering The 6010 has an independent 100kHz low pass filter on each channel to reduce input stage sensitivity when making low-frequency measurements.

High Stability Time Base Counter measurement stability can be improved by using an external clock or one of the two optional internal high stability time bases. The internal time base options are: TCXO: Standard OCXO: Option 1a Rubidium: Option 4

Optional Analog Output Option 3 (Analog Output) provides a high accuracy source to drive devices like chart recorders. This option is especially useful in measuring and recording the aging and temperature stability of devices like oscillators and Voltage to Frequency (V-F) converters.

Flexible Gate Time and Delay Time Control The Model 6010 allows fine control of gate time and delay time settings with 46 pre-defined times ranging from 100ms to 10s. In addition, gate or delay may be set to any value between 100ms and 1000 seconds using an external input.

Applications High-resolution, high-accuracy frequency and time measurements. RF measurements. Communications. V / F converter testing. Automatic test systems.

Options
Name  Description  Option 1  x10 Time Base Multiplier  Option 1A  OCXO + x10 Time Base Multiplier  Option 2  1.3GHz Channel C  Option 3  Analog Output  Option 4  Rubidium Time Base
Accessories
Name  Description  S-Rack mount  19  D-Rack mount  19  Case Kit  Professional Carrying Bag
Note: Options and Accessories must be specified at the time of your purchase.